-
Products
-
Quality Assurance
-
-
The use and maintenance of non-magnetic drill collars
release time：2024-01-31
source： network
The maintenance of non-magnetic drill collars requires following the following steps:
1. After use, mud and dirt should be removed, the wear of the threads should be checked, then anti rust oil should be applied and stored in a dry and ventilated place.
2. Regularly inspect the drill collars for scratches, dents, or other obvious damage. If found, it should be dealt with and recorded in a timely manner.
3. For drill collars with scratches or dents, polishing or grinding methods can be used for repair. After repair, the appearance and performance of the drill collar should be checked again to ensure that it meets the requirements.
4. During the use of drill collars, collision with hard objects should be avoided to avoid damage.
5. Drill collars should be stored in a dry, ventilated, non corrosive gas environment, and maintained at appropriate temperature and humidity.
6. For drill collars that are not used for a long time, their condition should be checked regularly and anti rust oil or anti rust agent should be applied to prevent corrosion.
7. If severe wear or damage is found on the drill collar, it should be replaced or repaired in a timely manner.
Through the above steps, the service life of non-magnetic drill collars can be effectively protected and extended, and their reliability and safety can be improved.
Previous Page:
Previous:
Next page:
Next:
Previous:
Previous Page:
Next:
Next:
Share
Share
Contact Us
Contact information
Address: 3rd Floor, Block B, Oriental International Mansion Commercial Building, Qinyuan Street, Jiyuan City, Henan Province
Mobile end
SAF Coolest v1.3 设置面板 OUJSX-ZPVW-WFASE-ZWF
无数据提示
Sorry, the current column has no content for the time being.!
You can view other columns or returnHome Page